Ultra Grab Construction Adhesive is a long-lasting product that renovators and builders prefer all the time. It can withstand extreme conditions whether natural or human-caused.
Can be applied in a cost-efficient manner for professionals and DIYers.
Gives a permanent bond between materials that cannot be removed.
Has an extreme green strength.
Applicable for indoor and outdoor.
Fast-curing feature saves a lot of time.
Short press time.
Specs
Chemical Structure: Acrylic dispersion
Density: 1.40 ± 0.03 g/ml
Skin Time: 30 – 40 min. (73°F and 50% R.H)
Curing Rate: Min. 1-2 mm/day (73°F and 50% R.H)
Temperature Resistance*: 14°F to +158°F
Application Temperature: +41°F to +95°F
Maximum Shear Strength (beech): >40 kgf/cm2 (After 6 hours)
Maximum Shear Strength (beech): >70 kgf/cm2 (After 24 hours)
*This information relates to fully cured product.
How to Use
The substrates must be dry, clean, free of dust and grease.
One of the surfaces must be porous to province a faster curing rate.
Application temperature must bebetween +41°F and +95°F.
Apply the adhesive to the edges andcorners of the materials to be bonded.
Press the materials together and fixproperly. The materials can still be shifted for any adjustment immediately after thebonding. It may be required to provide support during setting.
As long as the adhesive has not fullycured it must be protected against moisture or rain.
The excessive adhesive can be cleaned with water if it has not cured.
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.
