Deck Caulk Hybrid Polymer Sealant provides a powerful, tight bond on joints, decks, and other surfaces exposed to weather conditions. The sealant is the right choice when perfect glue is needed on all surfaces and materials.
Deck Caulk Hybrid Polymer Sealant can be used for multiple purposes. The advanced formula offers unparalleled strength and durability, ensuring your deck remains protected from the elements for years to come.
Deck Caulk Hybrid Polymer Sealant has been designed with user convenience in mind. The smooth, easy-to-apply consistency ensures a hassle-free experience, allowing you to achieve professional results with minimal effort. Plus, the caulk gun makes the product accessible to people with little experience as well as to professionals.
Wood, marble, glass, concrete surfaces, ceramics, and many more materials can be glued using this adhesive.
Painting on its surface is possible due to its special formula.
Shrinkage does not occur.
Solvents, isocyanates, and silicone are not contained in it.
Specs
Basis: AST Polymer
Curing Mechanism: Moisture Curing
Shore A – Hardness: 50±5 (ISO 868)
Density: 1,35± 0,03 g/ml
Tack free time: 30 min. ± 10 (73°F and 50% R.H)
Curing Rate: Min. 0,1in /24 hours (73°F and 50% R.H)
Tensile Strength: Min. 363 PSI (ISO 37)
Elongation at Break: Min. 200 % (ISO 37)
Tear Propagation Resistance: Min. 1450 PSI (ISO 34)
Movement Accommodation Factor: 10%
Shrinkage: Max. 3% (ISO 10563)
Sanding Time: 2-4 days after application
Service Temperature: -40°F to +194°F
Application Temperature: +41°F to +95°F
How to Use
Ensure that surfaces to be sealed are clean, dry and grease free.
The application temperature must be between +5°C (41 F) and +35°C (95 F).
In order to reduce the deformations of the joints, their depth must be much less than their width, minimum dimensions are 0,2×0,2 in, for wider joints the depth should be preferably half of the width and it is adjusted by the use of a backup material.
Cut the nozzle at 45° to required joint width and apply using a good quality hand operated gun.
After ensuring the joint gaps are thoroughly clean, a bond breaking tape must be applied to the bottom of the recess to prevent three sided adhesions.
Ensure the caulking is applied firmly from the bottom of the joint upwards to prevent air bubbles.
After application, the overfilled residue is removed with a spatula within 10 minutes.
If necessary, the slight residue left may be sanded/grinded down afterwards. Allow 48 hours before commencing sanding.
Sand along the joint length in the direction of the teak grain using 120 to 240 grit abrasive paper working from coarsest (120) to smoothest (240).
Excess uncured sealant may be cleaned with solvent. Cured sealant can be removed barely mechanically.
0,2in. joint depth is recommended for joint widths between 0,2in to 0,5in.
Joint width and depth ratio should be about 2:1.
Application Areas
General sealing, metal building constructions.
Windows, doors, decks, and roofs for waterproofing.
For plastic, rubber, wood, marble, brick, concrete, metal, porcelain, aluminum, and even PVC surfaces.
The Deck Caulk Hybrid Polymer Sealant tube recipe must be followed.
Be careful while you are using the product, and do not contact the naked skin!
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.
