Keeps its flexibility permanently and doesn’t crack easily.
Can be shaped and worked easily.
Admissible amount of VOC content.
Suitable for Indoor and outdoor use.
Can sand over.
Non-sagging.
Over-paintable.
Water-proof.
Specs
Chemical Structure: Acrylic Dispersion
Consistency: Smooth paste
pH: 7-8
Density: 1.65 ± 0.03 g/ml
Hardness Shore A: 30-50 (ISO 868)
Skin Time: 50 ± 20 min. (73°F and 50% R.H)
Curing Rate: Min. 0,1in/day (73°F and 50% R.H)
Elongation at Break: ≥300% (ASTM D412)
Service Temperature: 14°F to +176°F
Application Temperature: +41°F to +104°F
How to Use
The joints must be clean and free from dust, grease and rust.
No primer is required for non-porous surfaces. On porous surfaces such as concrete, stone, cement and plaster a primer (mixture of one part acrylic sealant and 4-5 parts of water) can be applied.
Min/max joint width must be 0,2in/1,0in. The recommended joint depth/width ratio is 1 to 2. Application temperature is between +41°F and +104°F.
Immediately after the application, smooth the sealant at once with wet finger or a wet tool.
Excess sealant can be removed by a wet cloth.
Keep the sealed joint dry at least for two hours.
Cured sealant can be removed mechanically.
Application Areas
Filling between construction elements such as wood, brick, concrete, drywalls, and plaster etc.
Filling most of the cracks, such as walls, plasters, and ceilings.
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.
